| Basic Specifications |
| Manufacturer's Part Number |
313881-B21 |
| Cabling Type |
Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T |
| Compliant Standards |
IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP) |
| Device Type |
Network adapter |
| PCI Specification Revision |
PCI 2.2, PCI-X 1.0 |
| Product Description |
HP NC7170 PCI-X Dual Port 1000T Gigabit Server Adapter - network adapter - 2 ports |
| Data Link Protocol |
Ethernet, Fast Ethernet, Gigabit Ethernet |
| Processor |
1 x 82546EB - Intel |
| System Requirements |
Microsoft DOS, Microsoft Windows 2000, Red Hat Linux, UnixWare 7.1.2, SuSe Linux, Novell NetWare 6.x, SunSoft Solaris 9, SCO OpenServer 5.0.7, Microsoft Windows Server 2003, UnixWare 7.1.4, SunSoft Solaris 10, SCO OpenServer 6, Microsoft Windows Server 20 |
| Bus Voltage |
Universal (3.3 V & 5.0 V) |
| Form Factor |
Plug-in card |
| Network / Transport Protocol |
TCP/IP |
| Dimensions (WxDxH) |
16.5 cm x 6.4 cm |
| Data Transfer Rate |
1 Gbps |
| RAM |
128 KB |
| Interface (Bus) Type |
PCI-X hot-plug 133 MHz |
| Ports Qty |
2 ports |
| General |
| Device Type |
Network adapter - 2 ports |
| Form Factor |
Plug-in card |
| Interface (Bus) Type |
PCI-X hot-plug 133 MHz |
| PCI Specification Revision |
PCI 2.2, PCI-X 1.0 |
| Bus Voltage |
Universal (3.3 V & 5.0 V) |
| Depth |
16.5 cm |
| Height |
6.4 cm |
| Environmental Parameters |
| Min Operating Temperature |
0 °C |
| Max Operating Temperature |
55 °C |
| Humidity Range Operating |
10 - 95% |
| Networking |
| Connectivity Technology |
Wired |
| Cabling Type |
Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T |
| Data Link Protocol |
Ethernet, Fast Ethernet, Gigabit Ethernet |
| Data Transfer Rate |
1 Gbps |
| Network / Transport Protocol |
TCP/IP |
| Remote Management Protocol |
SNMP |
| Status Indicators |
Link activity, port transmission speed |
| Features |
Full duplex capability, hot swap module replacement, ACPI support, auto-negotiation, load balancing, wake on LAN (WOL), network fault tolerance (NFT) |
| Compliant Standards |
IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP) |
| Expansion / Connectivity |
| Interfaces |
2 x network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 |
| Compatible Slots |
1 x PCI-X hot-plug 133 MHz |
| Miscellaneous |
| Compliant Standards |
FCC Class B certified, UL, CISPR 22 Class A, VCCI Class B ITE, BSMI CNS 13438 Class A, cUL, EN 60950, EN55022, ICES-003, EN55024 |
| Processor / Memory |
| Processor |
1 x 82546EB - Intel |
| RAM |
128 KB |
| Software / System Requirements |
| Software Included |
Drivers & Utilities |
| OS Required |
Microsoft DOS, Microsoft Windows 2000, Red Hat Linux, UnixWare 7.1.2, SuSe Linux, Novell NetWare 6.x, SunSoft Solaris 9, SCO OpenServer 5.0.7, Microsoft Windows Server 2003, UnixWare 7.1.4, SunSoft Solaris 10, SCO OpenServer 6, Microsoft Windows Server 2003 x64 Edition |
Share this page:
What are these?